Oct 23, 2026, 9:54 PMso it turns out the display supports up to 255 line segments, so you can just split an image into lines and (veeery slowly) send them all to the display :neofox_woozy:
- Oct 23, 2026, 9:54 PM
Replies
- Oct 23, 2026, 11:36 PM
line based background image + fast scroll text with special characters that are integrated into the font + slow scroll text for the plane :3
- Oct 25, 2026, 10:35 PM
Turning my attention to the LED modules that I pulled from the older generation of these displays, but having some trouble getting them to work properly.
They're neat, with an integrated double-buffered ontroller that takes care of the multiplexing and all that. Just send pixel data.
I wired up an ESP32 with level shifters, wrote some code and it mostly works, but every pixel is shown as 2 pixels wide. So my 32 bits of pixel data are cut off after 16 bit. - Oct 25, 2026, 10:35 PM
Okay, maybe they're doing a weird DDR kinda thing where the data is sampled on both clock edges (contrary to the datasheet - but my model is apparently not a standard one, doesn't appear in the datasheet with this exact part number). Tried bitbanging that, it only reacts to every second pixel now but still shows those as two. Welp.
- Oct 25, 2026, 10:35 PM
Then thought, hmm those panels also exist as 2-color variants with 2 data inputs, so maybe this is internally that, but the second channel is mapped to every second LED. Tried the "unused" pin that would be the second input by tying it to GND or VCC; didn't do shit. (GND just made the LEDs a bit brighter)
And the two other pins that could theoretically be remapped behave just like the datasheet says, so I feel like I'm out of options lol - Oct 25, 2026, 10:35 PM
This isn't even a "i need help" post, I'll just see tomorrow what the original display controller sends to the panels and probably figure it out, but it's so confusing :D
- Oct 26, 2026, 6:07 PM
It was just a signal integrity issue after all :neofox_facepalm:
My level shifters are apparently so bad that even at 1 kHz clock speed they cause ringing and thus double clock pulses lol
- Oct 29, 2026, 5:45 PM
I swapped the controller in my other SaF display with one from the ones I collected from the train line. I could never get the original controller to talk to me, but the swapped controller works :3
It auto-senses the display size too, and with a DIP switch I was able to change the logical display layout from "front and back side are logically next to each other" to "front and back side are logically above each other" :D - Oct 29, 2026, 7:04 PM
Literally installing a new font :3
It's so cute, one EEPROM per font :D
- Oct 31, 2026, 3:51 PM
I reverse enginenered the font EEPROM format! To make it easier, I replaced any bytes whose function wasn't obvious with 0x00 until something stopped working. I was able to do this to most bytes! So now I can just take any font and render it into an EEPROM image for the display.
- Oct 31, 2026, 3:52 PM
And of course I had to do it with Comic Sans
- Nov 1, 2026, 1:28 AM
:neocat_think_woozy:
- Nov 11, 2026, 9:15 PM
To come back to the more modern display in my hallway... It has started behaving weirdly a few days ago. Like, lagging, random things stuck on the screen, not updating, scroll texts freezing. I was puzzled, then I tried re-flashing the SD card dump I made when I got it, and it worked again.
It turns out. That it just logs everything it displays. To SD card. It was full, 0 bytes remaining. They just put a 4 GB SD card in there... and apparently no log rotation or anything???
- Nov 11, 2026, 9:16 PM
Like, this would have happened at the station they came from sooner or later too?? I'm so confused. SaF really were kind of sloppy.
- Nov 11, 2026, 9:17 PM
When I got it, it had 15 MB free, which is a lot for some logs. So it lasted until now. Kind of amazing timing
- Nov 11, 2026, 9:18 PM
Another thing I did: I managed to enable the TTS engine and hooked up a speaker to the amp that's already on the control board. Now I can trigger it to read what's being displayed.
Well, sort of. You have to set up some things, like tell it which text fields (identified by their coordinates) it should read in which order, with prefixes and suffixes and some more things. It also has an optional periodic pilot tone (a little pop) for vision-impaired people. - Nov 11, 2026, 9:19 PM
And since its web interface exposes a "free text" form to have it say anything (with several seconds of lag since the web server is painfully slow), I set that up as a notification target in Home Assistant. Now the display can speak out things like "Washing machine finished" or "You got mail" :D
- Nov 11, 2026, 9:55 PM
oh yeah also i have not found a brightness sensor in that display to this day. i have no idea what these engineers built there
Sammy Arson Fox ( foxytocin )theresnotime@fox.nexusOct 23, 2026, 9:55 PM@cato HECK YEAH :ablobfoxbongohyper:
Oct 23, 2026, 10:14 PM@cato would love to see a video!
Violet ProcyonViolet@chitter.xyzOct 23, 2026, 11:38 PM@cato nyoom!
- Oct 23, 2026, 11:59 PM
@cato cute <3
Zerurakocrypticcelery@chaos.socialOct 24, 2026, 6:43 AM@cato wheeee!
That is a really fun use of the capabilities.
Oct 24, 2026, 7:03 AM@cato huh? So the background needs to be drawn "manually", why it's so slow, and the plane and trains integrated?
- Oct 24, 2026, 8:11 AM
@uvok yeah! The thing doesn't really support graphics so I used the "draw horizontal / vertical line" commands in a hacky way. And the font has some symbols integrated.
curiousicaecuriousicae@tech.lgbtOct 24, 2026, 11:13 AM- curiousicaecuriousicae@tech.lgbtOct 24, 2026, 11:18 AM
- curiousicaecuriousicae@tech.lgbtOct 24, 2026, 11:28 AM
- Oct 24, 2026, 11:53 AM
@curiousicae @uvok technically the protocol supports it, no idea if this specific display does though
Krutonium://krutonium@treehouse.systemsOct 24, 2026, 8:20 AM@cato The transition between slowly drawing the background and the animation is jarring lol
Oct 24, 2026, 2:28 PM@cato where does one obtain such a display 🥺 we’d love to have one of those in our space in salzburg
- Oct 24, 2026, 2:29 PM
@pheeef see 2 posts before ><
- Oct 24, 2026, 2:36 PM
@cato ahhh sorry >.<
- Oct 24, 2026, 2:37 PM
- Oct 24, 2026, 2:46 PM
- Oct 24, 2026, 3:00 PM
- Oct 24, 2026, 3:02 PM
Nspacenspace@infosec.exchangeOct 27, 2026, 1:41 AM@cato sounds like you need source termination or a part with slower edge rates :D (been there done that)
- Oct 31, 2026, 6:46 PM
@cato Sehr Cool und Cursed! Wie wäre es mit DIN1451?
- Oct 31, 2026, 6:47 PM
@cato du brauchst nun ein Board mit meherern EEPROMS wo die die Fonts mit DIP switches auswählen kanst ^^
Oct 31, 2026, 10:39 PM@cato everyone shut up the scrolling comic sans marquee is talking
- Oct 31, 2026, 11:03 PM
@oli hahahaha
FoxotronicFoxotronic@anubis.socialNov 1, 2026, 2:13 AM@cato Font or picture?
- Nov 1, 2026, 3:04 AM
@Foxotronic font!
Nex CarterNexCarter@chaos.socialNov 11, 2026, 9:32 PM@cato das ist sooo cool!
mart-wmart_w@chaos.socialNov 12, 2026, 8:00 AM@cato inb4 they use one of the LEDs to read brightness
- Nov 12, 2026, 8:10 AM
@mart_w oh god
- mart-wmart_w@chaos.socialNov 12, 2026, 11:44 AM
@cato Might it be centrally controlled per station? They probably already have some kind of sensor to turn the platform lights on and off, and maybe they don't want the information displays next to each other at different brightnesses
Outfrost but more awoooutfrost@woof.techOct 26, 2026, 11:18 AM@cato that's so fucking cool :D
- Oct 26, 2026, 11:31 AM
@outfrost thanks x3
Legion495Legion495@mk.absturztau.beOct 24, 2026, 7:45 AM@cato@chaosfurs.social
You did good today :neofox_pat_floof:
JonlyJonly@mastodon.socialOct 24, 2026, 7:45 AM@cato time to woozy the db
Oct 24, 2026, 4:51 PM@cato This is peak furry Fediverse energy.
Right here.
Right now.
