big news.
i found a spare loose ATmega16-16PU.
i was able to successfully flash a bootloader to THAT.
so BOTH the '1284 and '328 are dead.
i went and spent AUD$30 on another ATmega1284PU, in the hopes that this new one will not be dead.
photos coming soon.
https://www.gammon.com.au/forum/threads/11637.html?id=11637
the instructions on this website are correct.
the project was able to flash an ATmega16-16PU this way.
the stock that we have on hand of ATmega328s and ATmega1284s are defective.
samples have been ordered from microchip directly.
@permacomputer @yrabbit i had some success...
@dirtycommo@anticapitalist.party @permacomputer@retro.social @yrabbit@mastodon.sdf.org
I didn’t expect there to be so many defective ATmega chips out there...🤔
This brings to mind the concept of permacomputing - if things go sideways, the chips that will actually be available are the ones currently in abundant supply and costing $1.50 (like this ESP32-P4), rather than the ones that were all the rage just yesterday, but now arrive from the factory with a 4-out-of-5 failure rate and a $30 price tag.😉
what error does avrdude give you?
@RueNahcMohr @permacomputer fails to detect the device signature. Comes up as all zeroes.
can you program anything with it? sounds like an interface problem.
Tie MISO high and see if its all ones :]
@RueNahcMohr @permacomputer the arduino pro micro I have will program an ATmega16, but not this '328 or '1284
The pro micro will also successfully flash another arduino mega.
I will try your suggestion.
Do you think I need to use high voltage programming?
no, high voltage is only needed if you turn the reset into an IO pin.