StarkRG@myside-yourside.net
Oct 18, 2026, 1:42 PMThree hours into a 16-hour print and all seems well. Much like a supervillain, I shall now leave it to itself while I go do other things (like sleep) and assume everything will go to plan.
Replies
- StarkRG@myside-yourside.netOct 18, 2026, 1:47 PM
Also: I don't appreciate OrcaSlicer telling me things are too close just because their footprints overlap. There's *plenty* of space inside the big one.
- StarkRG@myside-yourside.netOct 19, 2026, 3:11 AM
Success!
Next up, a 13.5-hour print.
- StarkRG@myside-yourside.netOct 19, 2026, 3:37 AM
Well, darn, not a total success. I wonder if the printer had a hard time keeping the chamber temperature up with the main source of heat (the bed) being so far away. There *is* a chamber heater, but it's not particularly strong (it could actually be stronger, but they skimped on the SSR so it needs to be run at 70%).
Also, I clearly set the retraction too small, it's quite fuzzy.
Oct 19, 2026, 4:05 AM@StarkRG I had a PLA part warp on my this morning. What material are you printing?
