@zl2tod @paul_ipv6 @ai6yr @Perrin42 @clive @scalzi @W6KME I only worked on Singer Business Machines mini computers. 5-bit internal, boot via card deck or disk drive from the terminal ( 90V diode logic, all white wire harness). They would upload data via a synch network adapter to an IBM 360.
The os was macro2, built on said IBM. It came on a 14inch 5MB disk pack (had to do head alignment on those to get a decent cat eye). 33ms hard wired partition switch. First alu I remember. Took a 19" rack, as did the disk partition. Could tweak the memory for i/o via jumpers on the edge of serial board. The thing out performed 8080's when doing i/o to pos terminals 200 in under 11 seconds with minimal droppage, almost none (dependant on total data content).