Login
You're viewing the techdon.dev public feed.
  • Oct 28, 2026, 5:43 AM

    So if I haven't done something subtly wrong here, this is an in-circuit capacitor tester, as seen in @RueNahcMohr's post here: infosec.exchange/@RueNahcMohr/

    As I understand it, it's a 555 timer and a floating reference that will alternate current across the capacitor to suss out caps whose ESR is well above normal. Just so happened I had a NE555 in SOIC8 and it laid out quite nicely on these proto boards I designed. I used a SS8050 and SS8550 for the drivers. And I just happened to have 22uF ceramic caps in 1206, so I used those (though I suspect DC bias derating is doing them no favors as they are 10V rated. :/). And I skipped the regulator, instead powering directly from 5V USB.

    A couple of circuit boards mounted on a 3D printed plate. The boards look like proto boards or solderable breadboards, and some things are soldered to it. There's a USB type-C connector on the left and a couple of wires going off to the right, looping around to pogo needle terminals.
    💬 0🔄 1⭐ 8