so, i want to do IPv4 routed access for end-users in a way that conserves IP addresses, since they're quite rare and valuable nowadays, but also doesn't require bridging.
will this work?
- each end-user connects to a layer 3 switch port. one device per port, no BYO switches
- static route a /32 to each client port on the switch, distribute these routes via IGP
- enable proxy arp on the client ports
- DHCP server assigns each client its static /32 based on the DHCP option 82 remote circuit id, but sends a prefix length of /27, or however large our actual network is; default router is the first usable address in the subnet
- all clients can reach each other and the default router via proxy arp + normal layer 3 routing. the actual default router is different based on which switch you're connected to, but clients don't know that.
- broadcast traffic won't work, but that's fine
i feel like this should work, but i also feel like i might be missing something. is there a better / more common way to do this?
(please don't say "just use bridging" or "just use NAT".)