Login
You're viewing the techdon.dev public feed.
  • Aug 29, 2025, 6:18 AM

    I printed one with a series of increasing diameter holes. Turns out 2.3mm is a snug fit. The holes have a chamfer but it all got kind of squished during printing so I had to ream them out. I couldn’t find anything that specified the corner radius, so I guessed. It’s a bit too tight. Second version is printing now.

    I definitely don’t have the precision to make these actually snap in, so I might just retain them with a bit of glue? I dunno. Maybe I’ll figure something out.

    The back end of a 9-pin connector showing the various subtly differently sized holes and a contact test fit in it.
    The front end of the connector, with holes that definitely look a bit small.
    💬 0🔄 0⭐ 0