Login
You're viewing the functional.cafe public feed.
  • Nov 19, 2026, 12:53 PM

    "Power is only what you allow it to be." -- Christopher Hitchens (but this is not quite what he was driving at.)

    So, a UK mains power meter just arrived; a reputable German brand, not a random Far Eastern factory emission. Bedded it in with a test load before installing it inline with my UPS, which is where most of the continuous household electrical load is.

    The immediate results were not conclusive; we're homing in on ~150W RMS without my main development box loaded, and excluding my "user facing" laptop.

    To put that in perspective, that's 2.5 classic incandescent light bulbs for my daily drivers, when I'm not compiling a ton of C++. I can't transition to alternative energy directly at my present location, but if I had sufficient PbAc or Li-Ion grid storage, it would be totally viable.

    Enforcing power management on my second development laptop, where I'm doing some C++ reverse engineering for capabilities based cybersecurity models, should improve efficiency.

    So it turns out not all ATX power supplies are created equal. My Nano ITX Celeron J4125 box claims 1.33W for the SoC overall based on RAPL derived turbostat(8) output.

    Yet the power meter I just plugged the i3-13100F based box into was claiming a peak 8W RMS immediately after I threw the mains switch, WITHOUT pressing the ATX power button. It stabilised at 2.8W.

    Now the meter claims a 29W RMS draw, with a spanking new headless RL10.3 install. WTAF? I literally built the box <48h ago. After applying the tuned powersave setting, turbostat for PkgWatt yields a ~1.6W result, and the inline mains meter reports ~28.7W RMS; clearly something guzzles joules... the AST2400 1-lane SVGA video card claims <2W draw, and the cooler is PWM.

    There is only the I226V for PTM time sourcing, and I left the other Mellanox card out of the new build; the LX series have lower wattage than regular ConnectX cards.

    After repeating this with the Nano ITX box, the PkgWatt stats from turbostat fall short of the draw reported at the mains: ~8.2W, comparable to my kitchen fridge. It uses 12V DC input specifically. The PSU shipped with the unit had a whopping 6A rated DC output; I swapped it for the 1A PSU I got in case I recover my genuine "Miller Time" GPSDO.

    💬 0🔄 0⭐ 1