Login
You're viewing the functional.cafe public feed.

Replies

  • Nov 11, 2026, 5:13 AM

    @emeb Using 230 always-running struck stiff-string models, each with a continuous damper amount obeying soft/sostenuto/open-damper/half-damper, and cross-resonance between those and a soundboard model, and both of those summed through a set of formants representing the shape of the board and position of the lid. I'd expect it to take up most of the DE10-Nano.

    Patch parameters would be things like string gauge, which key the undamped range starts at, which are the 1/2/3-string keys (unichords, bichords, trips), hardness of the hammers, softness of the felt, bounce, do we want modeled keybed whack, lid position, cabinet shape/size, etc. If you get crazy you could tune each individual string, so that one piano your uncle has with the horrible F# could be modeled with the right patch setting.

    There's no way I could ever produce a sampled piano that's even as good as what you get in your average acoustic piano preset, so I figure if I do acoustic piano at all, it will be modeled, like modartt pianoteq, but on an FPGA.

    💬 0🔄 0⭐ 0
  • Nov 11, 2026, 5:18 AM

    @ben Cool. I suspected that sampled piano wouldn't be up to snuff. Interesting how far physical modeling has come though. Could be interesting to add it as a separate bitstream load on the same hardware - can't use in parallel w/ your other stuff and switching takes some non-zero amount of time, but at least it'd be available and I suspect you'd have some patching options w/ model parameter changes.

    💬 1🔄 0⭐ 0
  • Nov 11, 2026, 5:29 AM

    @emeb Yep. I'll probably make a bunch of different ones with the exact same hardware setup. Now that I have mini-800 and Tymbal to draw from, I can mix and match things in different ways. (This clonewheel is mini-800's model, ported to fabric, plus a dedicated UI.)

    💬 0🔄 0⭐ 0
  • Nov 11, 2026, 5:34 AM

    @emeb Mini-800 also has rhodes, wurly, clav, and string-machine models already; the only question of how many I put on Stagewheel is how many will fit in the resources available.

    B3 took about 25%. Rhodes will probably come in there or slightly higher. Hopefully wurly and rhodes can share some space, and maybe string-machines and transistor organs could cozy up with the tonewheels and leave room for the clav.

    💬 0🔄 0⭐ 0
  • Nov 11, 2026, 5:40 AM

    @emeb I just got a Yamaha YC61 stage organ and it is a really nice implementation of what I'm going for here. Not the same by any means, but it's certainly in that YC/Nord Stage/Roland VK neighborhood.

    (True story: last night I heard zipper hash in my leslie model, and fixed it. Today I heard the same zipper hash in Yamaha's leslie model.)

    💬 0🔄 0⭐ 0
  • Nov 11, 2026, 5:43 AM

    @ben Heh - zipper noise is usually easy to fix, but also very easy to overlook. I had one that escaped for a few years in one product and released a fix last year just for that.

    💬 1🔄 0⭐ 0
  • Nov 11, 2026, 12:59 PM

    @emeb In my case it was zipper noise from the pickups, which was then getting swirled and hashed around by the leslie. The floating-point code from mini-800 didn't have it, but Claude took a shortcut on the way to fixed-point. I slapped it on the wrist.

    On the YC61, whenever the Leslie is on, you hear a swish, even if you're not playing anything. (This may actually be on purpose in their case. In my case, it wasn't.)

    💬 0🔄 0⭐ 0
  • Nov 13, 2026, 10:33 PM

    @emeb Update: it's on purpose. You can turn it off in the rotary speaker menu. (Neat.)

    💬 0🔄 0⭐ 0
  • 💬 0🔄 0⭐ 0