Login
You're viewing the functional.cafe public feed.

Replies

  • 💬 1🔄 2⭐ 10
  • Nov 7, 2026, 11:18 PM

    It's also very cool (and not very secure) that you can completely control the ANS from a Macintosh GUI running on a different machine on the network. The default AIX install didn't allocate all of my 2GB disk, so I ran the Disk Management Utility and allocated a new 1GB partition, mounting it under /usr/local. The CommandShell provides a terminal session to the ANS via ADSP.

    The Disk Management Utility, running on Mac OS and connected to an Apple Network Server. The disk hdisk0 has 1360MB available (out of 2032MB). A "New File System" dialog is frontmost, allowing attributes like size and mountpoint to be specified.
    A CommandShell window is running on Mac OS, with a terminal session to the Apple Network Server. The terminal shows that /usr/local exists and has 1015616 KB free. In the Disk Management Utility window behind it, we can see that the /usr/local filesystem now exists.
    💬 0🔄 1⭐ 7
  • 💬 0🔄 0⭐ 2
  • Nov 6, 2026, 10:25 PM

    @ctb31 Run `smit` and go to the "Communications Applications and Services" section. It should show configuration options for TCPIP and AppleTalk. If you don't have the AppleTalk option (or you don't have the /usr/bin/atlookup tool), then you likely need to reinstall the AppleTalk bundle from the CD. If you *do* have the option, make sure to select "Start AppleTalk". (I'm using netatalk and the AIR on separate machines on the same network; haven't yet tried ANS's built-in AURP service.)

    💬 0🔄 0⭐ 4
  • Nov 6, 2026, 10:43 PM

    @_the_cloud @ctb31 Oh! I did not know it had AURP support. I wonder if that implementation handles NATed traffic better than Cisco. If it does it would be interesting to compare against AIR.

    💬 0🔄 0⭐ 3
  • Nov 7, 2026, 5:14 AM

    @danieltufvesson @ctb31 Indeed, this could be an alternative to running AIR. It's configured in SMIT under the AppleTalk Advanced Features section, which is really just a point-and-click wrapper to edit the /etc/aurp_tunnel.cfg file. Looks like it could be trivial to generate a file in this format with GlobalTalk endpoints.

    The System Management Interface Tool (or "SMIT") for AIX, showing the AURP (IP Tunneling) option underneath AppleTalk Advanced Features. Beneath this option, there are buttons to add or remove remote IP addresses, export AppleTalk networks, and view the configuration.
    An AIX terminal window is displaying the contents of the /etc/aurp_tunnel.cfg file. There are four keywords for entries in this file: local, remote, hide, and export.
    💬 0🔄 0⭐ 5
  • Nov 15, 2026, 6:28 AM

    @danieltufvesson @ctb31 @kalleboo I've now got `aurpd` running successfully on the ANS. Mounting AppleShare server volumes over #GlobalTalk is noticeably faster, likely because it's not going through MacTCP. The downside is that I only see about 32 zones instead of the >40 that I was getting with AIR. Daniel: directories on your MacServ:Public volume enumerate very quickly! Karl: BaroNet is one of the missing zones. I verified that your IP is in my config so maybe it's just down coincidentally?

    A terminal is running on an emulated Apple Network Server in QEMU. We can see the output of the `atconfig -c m` command, showing that we are set up as a non-seed router. The `atconfig -z -C` command shows all the zones that aurpd has currently found.
    💬 1🔄 0⭐ 1
  • Nov 15, 2026, 8:06 AM

    @danieltufvesson @ctb31 @kalleboo Here's something very interesting: source code for `aurpd` was evidently part of Darwin early on. I wonder if this exists or can be enabled in early Mac OS X versions that still had the AppleTalk stack. stuff.mit.edu/afs/sipb.mit.edu EDIT: it's just the kernel module and not the user process that reads the cfg file, so that piece may be missing.

    💬 0🔄 0⭐ 0
  • 💬 1🔄 0⭐ 0
  • Nov 15, 2026, 4:22 PM

    @kalleboo OK, thanks. I verified with Wireshark that AURP is sending tickle packets to your IP and getting replies, but no zone information packets. Maybe there's something else I need to reboot here.

    💬 0🔄 0⭐ 1
  • 💬 0🔄 0⭐ 0
  • 💬 1🔄 0⭐ 0
  • 💬 0🔄 0⭐ 0
  • 💬 1🔄 0⭐ 0
  • Nov 16, 2026, 12:36 AM

    @kalleboo @danieltufvesson @fergycool I restarted those but no change. netatalk (specifically atalkd.conf) seeds the network so ANS isn't configured to do that. Sadly, there appears to be no documentation for using AURP on ANS; the "Using AIX, AppleTalk Services, and Mac OS Utilities on the Apple Network Server" manual only covers local AppleTalk management.

    The Tickle packets are actually being sent to *me* by kalleboo.com's IP, and I'm replying with Tickle Acknowledgment. I'm not initiating.

    💬 0🔄 0⭐ 0
  • 💬 0🔄 0⭐ 0