Login
You're viewing the functional.cafe public feed.
  • Oct 19, 2026, 11:12 AM

    I saw a vase at 3DPrintopia, and I thought it would make a nice lamp.

    Here's a lamp core insert I designed. It has a strip of COB LEDs wrapped around it. The base is M40x3 threaded.
    I also made a pentalobular wrench so I can screw the core into a lamp. And a negative volume so I can cut the screw threads into another 3D model.

    🧵 1/N

    #3DPrinting #3DDesign #LED

    I am holding a white 3D printed cylinder.  The bottom end is bigger with screw threads.  It has a shallow helical groove spiraling up its length, and a piece of COB LED strip is glued into the groove.  At the threaded end, there's a slot, and the cord leading from the LED strip exits through the slot.  The cylinder is hollow at the top.  There's a second cylinder standing on the table, bottom up.  On the bottom surface, there's a pentalobular slot (rounded five pointed star shape).  Next to it is a wrench with a knurled knob and a matching pentalobular tip that would fit into the slot.
    A CAD screen capture of a threaded cylinder with a tube protruding sideways from the bottom.  The picture is captioned, "Negative Volume".
    💬 0🔄 1⭐ 5